Last Update (Batch 1): 17.6.23 (From Serial > DR223899)
Hardware Kit Bom:
More Information: https://docs.zerog.one/manual/build/hydra/bill_of_material
Please ensure you use carriage helper when loading/unloading carriage when cleaning/greasing the rails.
Depending on the printer, you will need adjust the drag chain to correct length (See LDO doc on removing drag chains: https://docs.ldomotors.com/guides/cable_chain_guide)
| Size | Description | Note | QTY |
| M3X6 | SHCS | Counter Sunk | 8 |
| M3X8 | SHCS | Black zinc-nickel plating | 102 |
| M3X10 | SHCS | Black zinc-nickel plating | 4 |
| M4X16 | SHCS | Black zinc-nickel plating | 4 |
| M5X8 | SHCS | Black zinc-nickel plating | 5 |
| M5X10 | SHCS | Black zinc-nickel plating | 22 |
| M3 | Roll in spring loaded | 29 | |
| M5 | Roll in spring loaded | 27 | |
| 400mm | 2020 Extrusion | Ender 5 (Pro) Only | 1 |
| 510mm | 2020 Extrusion | Ender 5 Plus Only | 1 |
| 12x5mm | 4mm hole Neodymium | Countersunk Ring Magnet | 3 |
| For 2020 | 2020 Corner bracket | Black | 2 |
| M3 X D5.0 X L4.0 | Brass Heatset insert | 60 | |
| M3 Washer | Normal grade A M3 | Stainless Steel / DIN125 | 12 |
| M4 X 8 X L8 | Spacer | 3 | |
| 10mm M4 | Kossel ball | 3 | |
| 10x11mm - 1 Meter | R18 Drag chain | 1 | |
| 5mm-8mm | Shaft Coupling for lead-screw | 3 | |
| 100mm | MGN9C | LDO Stainless Steel Rails Z1 | 3 |
Full Kit [Reference], only hardware kit will be available. Contact us if you require full kit.
| Size | Description | Note | QTY |
| 400mm | MGN12H - LDO Stainless Steel Rails Z0 | Ender 5 (Pro) - Only | 3 |
| 500mm | MGN12H - LDO Stainless Steel Rails Z0 | Ender 5 Plus - Only | 3 |
| NEMA17 | LDO-42STH40-1684L400E Tr8x4 | Ender 5 (Pro) - Only | 3 |
| NEMA17 | LDO-42STH40-1684L470E Tr8x4 | Ender 5 Plus - Only | 3 |
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article