Zero G Mercury One.1 Motion Bom

Modified on Thu, 29 Aug at 8:34 PM

Last Update (Batch 1): 17.6.23 (From Serial > DR223899)

Last Update (Batch 2): 17.6.23 (From Serial > DR223956)


Use the provided M5 golden precision spacers for the bearing stack, not the M5 washers 

Please use M3x6 when using with linear rail/carriage from LDO

Please ensure you carriage helper when loading/unloading carriage when cleaning/greasing the rails. 

Note: Newer batch will include higher pre-load for the X axis, after cleaning and re-greasing the rail, please use the higher pre-load Z1 or if you kit include all Z1, use the one with tighter feeling for X axis or one with pair with similar feel should be used Y Axis. 


Bare-bone Kit Bom:

More Information:  https://docs.zerog.one/manual/build/mercury_eva/bill_of_material

 

SizeNotesQTY
M3X6
Black zinc-nickel plating
12
M3X8Black zinc-nickel plating65
M3X12Black zinc-nickel plating8
M3X16Black zinc-nickel plating8
M3X20Black zinc-nickel plating14
M3X25Black zinc-nickel plating5
M3X30Black zinc-nickel plating8
M3X35Black zinc-nickel plating12
M4X20Black zinc-nickel plating8
M5X8Black zinc-nickel plating6
M5X12Black zinc-nickel plating6
M5X20Black zinc-nickel plating4
M5X50Black zinc-nickel plating6



M3Roll in spring loaded
35
M5Roll in spring loaded
20



Eva Fastener Kit

M3X20Black zinc-nickel plating5
M3Hex Nut Stainless Steel20
M3X35Black zinc-nickel plating4
M5Hex Nut Stainless Steel2
M3X12Black zinc-nickel plating9
M3X10Black zinc-nickel plating10
M3X25Black zinc-nickel plating3
M3X50Black zinc-nickel plating4
M2.5X12Black zinc-nickel plating4
M3X16Black zinc-nickel plating2
M3X30Black zinc-nickel plating2
M3X8Black zinc-nickel plating20
M3X35Black zinc-nickel plating7
M3X40Black zinc-nickel plating4



370mm2020 Extrusion - Ender 5 (Pro) - Only1
500mm2020 Extrusion - Ender 5 Plus - Only1



M5X30mmPrecision dowel pin
10
5*13*4 MmF695-2RS
20
6mm2GT 20T Idler
2
6mm2GT 20T Pulley
2
6m
GATES-LL-2GT
1
M3 X D5.0 X L4.0Heat set insert
50
M3Hex Nut Stainless Steel10
M3 WasherNormal grade A M310
M5 Washer/ShimNormal grade A M540
Sand Paper

2


Full Kit:

Include bare bone kit and below rails/motors

 

Size
Note
QTY
300mmMGN12H - Stainless Steel - Ender 5 (Pro) - Only3
450mmMGN12H - Stainless Steel - Ender 5 Plus - Only3



Stepper MotorBase on ldo-42sth48-25042

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article