Recent Searches

No recent searches

    Popular Articles

      Articles
      View all
        Topics
        View all
          Tickets
          View all
            no results

            Sorry! nothing found for

            Zero G Mercury One.1 Motion Bom (Batch 1)

            Modified on Fri, 3 May at 10:45 PM

            Last Update (Batch 1): 17.6.23 (From Serial > DR223899)

            Last Update (Batch 2): 17.6.23 (From Serial > DR223956)


            Use the provided M5 golden precision spacers for the bearing stack, not the M5 washers 

            Please use M3x6 when using with linear rail/carriage from LDO

            Please ensure you carriage helper when loading/unloading carriage when cleaning/greasing the rails. 

            Note: Newer batch will include higher pre-load for the X axis, after cleaning and re-greasing the rail, please use the higher pre-load Z1 or if you kit include all Z1, use the one with tighter feeling for X axis or one with pair with similar feel should be used Y Axis. 


            Bare-bone Kit Bom:

            More Information:  https://docs.zerog.one/manual/build/mercury_eva/bill_of_material

             

            SizeNotesQTY
            M3X6
            		Black zinc-nickel plating
            		12
            M3X8Black zinc-nickel plating65
            M3X12Black zinc-nickel plating8
            M3X16Black zinc-nickel plating8
            M3X20Black zinc-nickel plating14
            M3X25Black zinc-nickel plating5
            M3X30Black zinc-nickel plating8
            M3X35Black zinc-nickel plating12
            M4X20Black zinc-nickel plating8
            M5X8Black zinc-nickel plating6
            M5X12Black zinc-nickel plating6
            M5X20Black zinc-nickel plating4
            M5X50Black zinc-nickel plating6



            M3Roll in spring loaded
            		35
            M5Roll in spring loaded
            		20



            Eva Fastener Kit

            M3X20Black zinc-nickel plating5
            M3Hex Nut Stainless Steel20
            M3X35Black zinc-nickel plating4
            M5Hex Nut Stainless Steel2
            M3X12Black zinc-nickel plating9
            M3X10Black zinc-nickel plating10
            M3X25Black zinc-nickel plating3
            M3X50Black zinc-nickel plating4
            M2.5X12Black zinc-nickel plating4
            M3X16Black zinc-nickel plating2
            M3X30Black zinc-nickel plating2
            M3X8Black zinc-nickel plating20
            M3X35Black zinc-nickel plating7
            M3X40Black zinc-nickel plating4



            370mm2020 Extrusion - Ender 5 (Pro) - Only1
            500mm2020 Extrusion - Ender 5 Plus - Only1



            M5X30mmPrecision dowel pin
            		10
            5*13*4 MmF695-2RS
            		20
            6mm2GT 20T Idler
            		2
            6mm2GT 20T Pulley
            		2
            6m
            		GATES-LL-2GT
            		1
            M3 X D5.0 X L4.0Heat set insert
            		50
            M3Hex Nut Stainless Steel10
            M3 WasherNormal grade A M310
            M5 Washer/ShimNormal grade A M540
            Sand Paper

            		2


            Full Kit:

            Include bare bone kit and below rails/motors

             

            Size
            		Note
            		QTY
            300mmMGN12H - Stainless Steel - Ender 5 (Pro) - Only3
            450mmMGN12H - Stainless Steel - Ender 5 Plus - Only3



            Stepper MotorBase on ldo-42sth48-25042

            Was this article helpful?

            That’s Great!

            Thank you for your feedback

            Sorry! We couldn't be helpful

            Thank you for your feedback

            Let us know how can we improve this article!

            Select at least one of the reasons
            CAPTCHA verification is required.

            Feedback sent

            We appreciate your effort and will try to fix the article

            Preview
            0 of 0