Bondtech CHT VOL Flow Test data
Print
Modified on: Mon, 30 Oct, 2023 at 11:35 PM
Comparing a standard 0.6 Volcano nozzle with a 0.6 CHT Volcano nozzle
Product Listing:
https://store.dremc.com.au/products/bondtech-cht%C2%AE-v6-vol-volcano-m6-coated-brass-nozzle Room Temperature | 20 - 25 °C |
Material | HT-PLA |
Manufacturer | add:north |
Vref ( current ) | ( 500mA ) |
Extruder | LGX 1.75 |
Arm Position | 0 1 2 3 4 5 |
Motor | LDO Nema17 |
Hotend | E3D Volcano |
Nozzle | 0.6mm CHT |
Nozzle ( °C ) | Feed Rate | Flow Rate (mm^3/s) |
200 °C | 650 | 26.06 |
210 °C | 810 | 32.47 |
220 °C | 910 | 36.48 |
230 °C | 1090 | 43.70 |
240 °C | 1175 | 47.10 |
250 | 1250 | 50.11 |
260 °C | 1360 | 54.52 |
270 °C | 1450 | 58.13 |
280 °C | 1580 | 63.34 |
add:north recommended temperature for HT-PLA: 200 - 230 °C
Room Temperature | 20 - 25 °C |
Material | HT-PLA |
Manufacturer | add:north |
Vref ( current ) | ( 500mA ) |
Extruder | LGX 1.75 |
Arm Position | 0 1 2 3 4 5 |
Motor | LDO Nema17 |
Hotend | E3D Volcano |
Nozzle | 0.6mm Standard |
Nozzle ( °C ) | Feed Rate | Flow Rate (mm^3/s) |
200 °C | 520 | 20.85 |
210 °C | 585 | 23.45 |
220 °C | 630 | 25.26 |
230 °C | 705 | 28.26 |
240 °C | 750 | 30.07 |
250 °C | 810 | 32.47 |
260 °C | 865 | 34.68 |
270 °C | 910 | 36.48 |
280 °C | 960 | 38.48 |
add:north recommended temperature for HT-PLA: 200 - 230 °C
Bondtech CHT Volcano Flow Rate Gains
( °C ) | ( mm^3/s ) | ( % ) |
Nozzle Temperature | Absolute Increase | Relative Increase |
@ 200 °C | + 5.21 | + 25% |
@ 210 °C | + 9.02 | + 38% |
@ 220 °C | + 11.22 | + 44% |
@ 230 °C | + 15.43 | + 55% |
@ 240 °C | + 17.04 | + 57% |
@ 250 °C | + 17.64 | + 54% |
@ 260 °C | + 19.84 | + 57% |
@ 270 °C | + 21.65 | + 59% |
@ 280 °C | + 24.85 | + 65% |
Did you find it helpful?
Yes
No
Send feedback Sorry we couldn't be helpful. Help us improve this article with your feedback.