TABLE OF CONTENTS
Written Guide:
- Shake the MAGIGOO® Pen
- Press the nib (end of your pen) on the printing bed for MAGIGOO® to flow.
- Spread the adhesive evenly on the printing area(cover your bed with an even thin layer).
- Make sure that no spots are missed.
It's most effective to apply MAGIGOO® on a clean bed. For optimal results, apply it when the printing bed is cold, although it can also be used on a hot bed. Ensure you use MAGIGOO® with the recommended plastics, and that the bed is properly leveled with the right printing settings. Gently squeeze the bottle only when the nib is in contact with the bed, and avoid letting the nib touch any dirt.
Once your prints are complete and have come off the bed, clean the cool printing surface by wiping it with a damp cloth using only water (if you wish to clean it).
Full PDF:
For more tips and tricks on 3D Printing and using Magigoo, kindly refer to full manual:
https://magigoo.com/app/uploads/2022/01/Magigoo-Manual-v1.21.pdf
Instruction Video:
How to store Bottle
How to store MAGIGOO® is best stored upright, with the cap closed and away from direct sunlight.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article