Creality Enclosure Tent Overview and How To Install

TABLE OF CONTENTS

• Written Guide(4008030061/4008030049/4008030050 - with two way pipe joiner-  Clear/White Glass Fibre Rod Versions):
• Video Guide (4008030061/4008030049/4008030050 - without Joiner Two Way Pipe - Clear/White Glass Fibre Rod Versions):
• Video Guide (4008030004 - Sliver tube variant ): 
• Install Video (4008030005/4008030002 - Sliver tube variant)

Enclosure: https://store.dremc.com.au/products/creality-3d-printer-enclosure-for-ender-3-series

Install notes: Ensure you built the frame before installing the fabric tent, ensure the rods are flush with corner parts, its may require light plastic/rubber mallet to set in place. The Frame should slide in place, if you fitments issue please ensure the correct X/Y/Z rods are install and rods are seated into part.

Written Guide(4008030061/4008030049/4008030050 - with two way pipe joiner-  Clear/White Glass Fibre Rod Versions):

Please refer to the included instructions provided with your product. Depending on the variant, size, or batch of your kit, the labelling of the rods may vary. Most kits include three different lengths of rods, so it’s important to match them correctly.

If needed, you can refer to the product listing for additional guidance or contact our support team with your order number and any relevant details for further assistance.

Example: Please refer to your included install manual as depending on your size you may or may not include/require two way pipe. Please always ensure the outer dimension match the kit you purchased before installing cover to avoid damaging the cover if you miss install the rods.

In most case there is 3 different size rod labelled for each axis direction such as X/Y/Z, please refer to the include install manual or using the size of tent you purchased dimensions as a guide.

Video Guide (4008030061/4008030049/4008030050 - without Joiner Two Way Pipe - Clear/White Glass Fibre Rod Versions):

Video Guide (4008030004 - Large - Sliver tube variant): 

Start from 3:35 (Time Stamp)

Install Video (4008030005/4008030002 - Small/Medium - Sliver tube variant)

Credit: https://www.youtube.com/@MyTechFun

Start from 2:42 (Time Stamp)