How to replace K2 Plus Nozzle Wiper

Modified on Sun, 1 Dec, 2024 at 9:40 PM

Install Video:

Written Guide:

Tool Required

H2.0 Hex Wrench
New nozzle wiper

Operation Steps

Remove
Straighten the hitch/linchpin and remove it.
擦嘴模块01.png 擦嘴模块02.png

Remove the rotation shaft and waste shield.

Use the H2.0 hex wrench to remove the 2 M3 screws (located on the inner side of the waste chute) 擦嘴模块04.png

Remove the damaged wiper.

1.3 Installation Steps

Place the new nozzle wiper on the right side of the waste chute, with the threaded holes facing outwards.
擦嘴模块06.png

Use the H2.0 hex wrench to install the 2 M3 screws (on the inner side of the waste chute) 擦嘴模块07.png

Place the waste shield underneath the wiper , align the holes and insert the rotation shaft. 擦嘴模块08.png

Insert the hitch/linchpin and bend it to secure.

2. Replace wiper adhesive tape

2.1 Tool Required

New wiper adhesive tape

2.2 Operation Steps

Remove
Peel off the old damaged adhesive tape from the nozzle wiper.
擦嘴胶条01.png

2.3 Installation Steps

Remove the protective backing.
擦嘴胶条02.png

Attach the new adhesive tape onto the nozzle wiper base.