Bigtreetech
Our Github: https://github.com/dremc/Marlin Our Tree Naming Scheme: Board Name - Printer Name - Additional Add-ons Board Name: E3V2...
Fri, 4 Nov, 2022 at 10:02 AM
Note: for SB included CAN cable cable is tinned, we recommended cutting off tinned and re-crimping with ferrules or use bare wire. Video Guide: ...
Mon, 13 Nov, 2023 at 2:15 PM
This firmware from the community (Youtuber Kersey Fabrications) A special thanks for him pre-compling the firmware for the community. Product Listing (S...
Fri, 23 Feb, 2024 at 11:22 AM
Github (Firmware): https://github.com/bigtreetech/BIGTREETECH-TouchScreenFirmware Video Guide: Written Guide: Installation NOTE: For devic...
Wed, 14 Sep, 2022 at 5:31 PM
Are you have issue flashing firmware via sd card? It may have corrupted boot loader. Module https://store.dremc.com.au/products/usb-to-ttl-ch340g-uart...
Mon, 12 Dec, 2022 at 5:49 PM
H2 Original (non revo/lite) edition Heat Break : Store Link (H2 specific) Bi Metal Version: Store Link Nozzle : Store Link (Any V6 style/compa...
Sun, 2 Apr, 2023 at 6:15 PM
Bootloader for SKR 3 H723 MCU, please follow step as Ocotpus to install software/use software but some process may differ on SKR 3 such as setting up jumper...
Thu, 11 May, 2023 at 11:46 AM
Pad 7 Documentation: https://github.com/bigtreetech/Pad7 Video Guide / Overview
Thu, 11 May, 2023 at 7:22 PM
H2 V2S Lite Manual, see below attached PDF manual.
Sun, 21 May, 2023 at 6:09 PM
Pin Out Colour V3: https://github.com/bigtreetech/BIGTREETECH-OCTOPUS-Pro/blob/master/Hardware/BIGTREETECH-Octopus-Pro-V1.0-Color-PIN-V3.0.pdf
Thu, 7 Sep, 2023 at 8:29 PM