Slice Engineering

How Do I Apply Plastic Repellent Paint™?
Plastic Repellent Paint™ is super easy to apply. The vial comes with a brush top applicator that is used to paint the nozzle or hot block. Open your vial ...
Wed, 26 Jan, 2022 at 7:07 PM
Mosquito® Installation Instructions
Installation PDF   Mosquito® Installation Instructions                           Mosquito Performance Advantages             Swap nozzle...
Thu, 12 May, 2022 at 11:04 PM
Copperhead™ Installation Instructions
Install Guide PDF
Thu, 12 May, 2022 at 10:46 PM
How to Properly Use Boron Nitride Paste?
  We recommend Boron Nitride Paste for use in hotends of any brand to significantly improve heat transfer. For decades it has been used as a “heat transfer ...
Thu, 12 May, 2022 at 10:59 PM
How to remove your heater/temperature sensor once the Boron Nitride Paste has dried?
If you are reading this article, odds are that you are trying to remove your heater or temperature sensor from your hot block. If you add Boron Nitride Past...
Wed, 26 Jan, 2022 at 7:07 PM
What is the small piece of metal that comes with the temperature sensors used for?
This small piece of metal is a dowel pin. It is used to fill in the extra space in the thermistor slot on the hot block. Since the thermistor is shorter tha...
Thu, 12 May, 2022 at 11:00 PM
Filament Drying Desiccant Usage Instructions
Gather the materials you will need:   the Filament Drying Desiccant canister a spool of filament that needs to be dried (spoiler alert, all spools need ...
Thu, 12 May, 2022 at 11:21 PM
Mosquito Assembly and Disassembly Instructions
Mosquito™ Assembly/Disassembly Instructions             In addition to its many performance benefits, the Mosquito™ hotend is a modular design ...
Thu, 12 May, 2022 at 11:23 PM
Modix Upgrade Kit Installation Instructions
          What You Need             Modix Upgrade Kit (Left/Right/Dual) Mosquito Magnum+ 1.75 Air-Cooled Kit 24V Hotend Cooling Fan Nozz...
Thu, 12 May, 2022 at 11:25 PM
Copperhead Heat-break for Prusa Mini Install Guide
Disassembly Guide Step 1: Unload filament Turn your printer ON Use option Filament > Unload Filament Wait for filament to unload ...
Tue, 6 Sep, 2022 at 8:05 PM