How to replace Filament Inlet of CFS

Spare Part: https://store.dremc.com.au/products/creality-cfs-first-stage-feeder

Install Video:

Written Guide:

Source: https://wiki.creality.com/en/cfs/filament-inlet-of-cfs

 2. Steps

 2.1 Unplug four PTFE tubes

Remove four screws

 2.2 Pull out the entire filament inlet

Place the entire CFS box upright, manually pull out the entire filament inlet

 2.3 Unplug the cable

Remove the cable cover, unplug the cable from the motor adapter board

 2.4 Remove the entire filament inlet

2.5 Remove two screws & unplug the cable

Locate the filament inlet that needs to be replaced, unscrew the fixing screws, and remove two cable wires.

2.6 Remove the filament inlet that needs to be replaced

Remove the filament inlet to be replaced along the direction of the PTFE tube.

How to replace Filament Inlet of CFS